Reading Technologies Inc EH4000 Eliminator II 1/2" – Regulator and Gauge Assembly

Reading Technologies Inc EH4000 Eliminator Ii 1/2" – Regulator & Gauge Assembly- Designed to provide low humidity air for one gun spraying. Patented "Inverse Flow" technology. Removes water, dirt, oil and water vapor. Activated carbon pre-filter with automatic drain. Second stage desiccant final filter, no desiccant dust migration! 1/2" NPT Inlet, 1/4" NPT Outlet. 1.0 micron or larger and activated carbon oil absorption to 0.003ppm. Up to 30 scfm flow capacity. With spin-on, spin-off element maintenance, this unit is a best seller and perfect for prep and in the paint booth. Perfect for waterborne and solvent borne finishes. 1/4" regulator and gauge assembly. Continuous Low Dew Point Operation, Easily Maintained and Serviced, Upwards Compressed Air Drying, Built-in Dew Point w/ Indicator, No Desiccant Dust Migration, and Low Pressure Drop Design.

Activated Carbon Prefilter“Inverse Flow™” TechnologyAutomatic Drain in 1st StageBuilt-in Final FilterSpin-on/Spin-off Desiccant CanistersWall Mountable DesignsApplications:Operate only one paint gun.Do not attempt to operate multiplepaint guns with this unit.Provide dry, oil-free air to -40°F dewpoints, virtually free of dried particulate.Be installed as close as possible tothe point-of-use and as far aspossible from the compressor.

Port Size Inlet: 1/2” - Outlet: 1/4”Thread Style NPTDryer Design Manual, RefrigeratedRecommended Temp 100 Degrees Fahrenheit Maximum Pressure* 150 PSIGDryer Capacity -40 Degrees Fahrenheit Filter Capacity 1.0 micron and larger Activated Carbon Oil Absorption to 0.003ppmFlow Capacity 30 SCFM Differential Pressure <5.0 PSID at Rated FlowHeight 19"Width 15"Depth 5"